Black plate (230,1)
北米Model "A1100BE-A" EDITED: 2010/ 3/ 23
5-38 Audio
NOTE
. HUB class USB memory cannot be
played.
. ATAPI subclass USB cannot be
played.
. High Speed USB 2.0 cannot be
played.
. A USB memory that is powered by a
source other than the USB power
supply (for example, an AC power
adapter, etc.) cannot be operated.
. A USB memory that is connected to
the memory card reader or multi card
reader cannot be operated.
& Connectable iPod
®
models
Model Firmware version
iPod
®
5G 1.3
5.5G 1.3
classic 1G 2.0.4
classic 2G 2.0.4
nano 2G 1.1.3
nano 3G 1.1.3
nano 4G 1.0.4
nano 5G 1.0.2
touch 1G 3.1.2
touch 2G 3.1.2
iPhone
®
1G (GSM) 3.1.2
3G 3.1.2
3G S
3.1.2
CAUTION
Do not connect an iPod
®
other than
the previously stated models. Doing
so may result in a malfunction or,
depending on conditions, cause a
fire.
NOTE
. iPod
®
is a registered trademark of
Apple Inc.
. You are only permitted to personally
copy and play copyright-free material
or material that is legally permitted to
be copied and played by using an
iPod
®
and iTunes. Copyright infringe-
ment is prohibited by law.
. To check the firmware version of an
iPod
®
, connect it to a computer and
check the device manager. For further
information, see the User’s Guide that
comes with the iPod
®
. To update the firmware version of an
iPod
®
, visit the Apple Inc. website.
. Depending on the model and firm-
ware version of an iPod
®
, it may not
work properly or not operate at all.
& Connecting USB storage de-
vice / iPod
®
CAUTION
. If the data stored in an iPod
®
is
deleted while it is connected to
the in-vehicle system, the data
cannot be recovered.
. Do not store an iPod
®
in the
vehicle. If an iPod
®
is left in the
vehicle for a long period of time,
To Next Page
Loading...
