Black plate (313,1)
北米Model "A1100BE-A" EDITED: 2010/ 3/ 23
& Hill start assist warning light/
Hill start assist OFF indicator
light
Refer to “Hill start assist warning light (MT
models – if equipped)/Hill start assist OFF
indicator light (STI)” F3-23.
Cruise control
Cruise control enables you to maintain a
constant vehicle speed without holding
your foot on the accelerator pedal and it is
operative when the vehicle speed is 25
mph (40 km/h) or more.
WARNING
Do not use the cruise control under
any of the following conditions.
These may cause loss of vehicle
control.
. driving up or down a steep grade
. driving on slippery or winding
roads
. driving in heavy traffic
NOTE
. If you press the “CRUISE” main
switch button while turning the ignition
switch “ON”, the cruise control func-
tion is deactivated and the cruise
control indicator light flashes. To re-
activate th e cruise control function,
turn the ignition switch back to the
“Acc” or “LOCK” position, and then
turn it again to the “ON” position.
. Make sure the “ CRU ISE” main
switch is turned off when the cruise
control is not in use to avoid uninten-
tionally setting of the cruise control.
& To set cruise control
1. Push the “CRUISE” main switch but-
ton.
Starting and operating 7-43
– CONTINUED –
7
To Next Page
Loading...
