Black plate (40,1)
北米Model "A1100BE-A" EDITED: 2010/ 3/ 23
1-10 Seat, seatbelt and SRS airbags
release strap and then fold the seatback
down.
To return the seatback to its origin al
position, raise the seatback until it locks
into place and make sure that it is securely
locked.
You can keep the seatbacks locked when
you leave your vehicle and valet key at a
parking facility.
1. Pull the lock release strap behind the
seatback out from its holder.
2. Raise the seatback until it locks into
place with the lock release strap hanging
in the trunk. Make sure that the seatback
is securely locked.
In this case, perform the following steps to
fold the seatback down again.
1. Open the trunk lid. Refer to “Trunk lid
(4-door)” F2-25.
2. Access the lock release strap from the
trunk, and fold the seatback forward while
pulling the strap down.
! 5-door models
1. Lower the head restraints.
2. Unlock the seatback by pulling the
release knob and then fold the seatback
down.
To return the seatback to its original
position, raise the seatback until it locks
into place and make sure that it is securely
locked.
To Next Page
Loading...
