Black plate (63,1)
北米Model "A1100BE-A" EDITED: 2010/ 3/ 23
There are two or three anchorages on the
rear wall of the cargo area.
! To hook the top tether
1. Remove the head restraint at the
window-side seating position where the
child restraint system has been installed
with the lower anchorages or seatbelt; lift
up the head restraint while pressing the
release button. Store the head restraint in
the trunk (4-door) or cargo area (5-door).
Avoid placing the head restraint in the
passenger compartment to prevent it from
being thrown around in the passenger
compartment in a sudden stop or a sharp
turn.
4-door models
5-door models (type A)
5-door models (type B)
2. Open or remove the cover for the
appropriate upper anchorage.
NOTE
For 5-door models with the type B top
tether anchorages, there is a top tether
cover on the cargo floor cover. Lift up
the cargo floor cover and remove the
top tether cover. After removing the
cover, store it in the under-floor sto-
rage compartment or another storage
compartment. Refer to “Under-floor
storage compartment” F6-14 or “Sto-
rage compartment” F6-4.
Seat, seatbelt and SRS airbags 1-33
– CONTINUED –
1
To Next Page
Loading...
