Black plate (146,1)
北米Model "A1120BE-B" EDITED: 2011/ 10/ 28
3-24 Instruments and controls
Information display (if
equipped)
1) Outside temperature indicator
2) Driving information display
3) Clock
Withtheignitionswitchinthe“ACC”
position, the clock appears on the display.
With the ignition switch i n the “ON”
position, the outside temperature indica-
tor, driving information display and clock
all appear on the display.
& Outside temperature indica-
tor
1) U.S.-spec. models
2) Except U.S.-spec. models
The outside temperature indicator shows
the outside temperature in a range from
−40 to 1228F(−40 to 508C).
The indicator can give a false reading
under any of the following conditions.
. When there is too much sun.
. During idling; while running at low
speeds in a traffic jam; when the engine
is restarted immediately following a shut-
down.
. When the actual outside temperature
falls outside the specified indicator range.
! Road surface freeze warning indi-
cation
1) U.S.-spec. models
2) Except U.S.-spec. models
When the outside temperature drops to
378F(38C) or lower, the temperature
indication flashes to show that the road
surface may be frozen.
If the outside temperature drops to 378F
(38C) or lower while the display is giving
an indication other th an the outside
temperature, the display switches to the
outside temperature indication and flashes
for 5 second s befo re re turni ng to its
original indication.
If the display is already indicating an
outside temperature of 378F(38C) or lower
when the ignition switch is turned to the
To Next Page
Loading...
