Subaru 2012 Impreza - Date and Time Settings

Black plate (159,1)
北米Model "A1120BE-B" EDITED: 2011/ 10/ 28
& Date and time settings
The items in the date and time settings
can be set. To change the items, operate
the “
” or “ ” switch.
NOTE
. The “ Date” item must be s et to
display the “Birthday”, “Anniversary”
and notifications for vehicle mainte-
nance.
. The “Birthday” and “Anniversary”
items can be entered after the “Date”
item has been set.
! Preparation for date setting
1. Turn the ignition switch to the “ON”
position and pull the “
/SET” switch
toward you for more than 2 seconds.
2. After the selection screen is displayed,
operate the “
” or “ ” switch to show the
“Date” item. Then, pull the “
/SET” switch
toward you.
! Current date and time setting
1. Perform the preparation steps accord-
ing to “Preparation for date setting” F3-
37.
2. Operate the “ ” or “ ” switch to
select the “Date” item, and then pull the
“
/SET” switch toward you.
3. Select the item to set by operating the
“
” or “ ” switch, and then pull the “ /
SET” switch toward you.
4. Select a number by operating the “ ”
or “
” switch, and then pull the “ /SET”
switch toward you.
Instruments and controls 3-37
– CONTINUED –
3