Black plate (61,1)
北米Model "A1120BE-B" EDITED: 2011/ 10/ 28
firmly. For additional instructions, refer to
“Top tether anchorages” F1-33.
7. Before seating a child in the child
restraint system, try to move it back and
forth and right and left to verify that it is
held securely in position.
8. To remove the child restraint system,
follow the reverse procedures of installa-
tion.
If you have any question concerning this
type of child restraint system, ask your
SUBARU dealer.
& Top tether anchorages
Your vehicle is equipped with two or three
top tether anchorages so that a child
restraint system having a top tether can
be install ed in the rear seat. When
installing a child restraint system using
top tether, proceed as follows, while
observing the instructions by the child
restraint system manufacturer.
Since a top tether can provide additional
stability by offering another connection
between a child restraint system and the
vehicle, we recommend that you use a top
tether whenever one is required or avail-
able.
! Anchorage location
! 4-door models
1) For left seat
2) For center seat (if equipped)
3) For right seat
Seat, seatbelt and SRS airbags
1-33
– CONTINUED –
1
To Next Page
Loading...
