Black plate (174,1)
北米Model "A1120BE-B" EDITED: 2011/ 10/ 28
3-52 Instruments and controls
6. The system will notify you that the
setting is complete for approximately 3
seconds.
& Maintenance settings
The items in the maintenance settings can
be set. To change the items, operate the
“
” or “ ” switch toward you.
! Preparation for maintenance set-
tings
1. Turn the ignition switch to the “ON”
position, and then pull the “
/SET” switch
toward you for more than 2 seconds.
2. After the selection screen is displayed,
operate the “
” or “ ” switch to show the
“Maintenance” item. Then, pull the “
/
SET” switch toward you.
! Engine oil setting
1. Perform the preparation steps accord-
ing to “Preparation for maintenance set-
tings” F3-52.
2. Operate the “ ” or “ ” switch to
select the “Engine Oil” item, and then pull
the “
/SET” switch toward you.
3. Select the setting location (month, day,
year or distance) by operating the “
” or
“
” switch, and then pull the “ /SET”
To Next Page
Loading...
