Black plate (173,1)
北米Model "A1120BE-B" EDITED: 2011/ 10/ 28
“ ” switch, and confirm the setting by
pulling the “
/SET” switch toward you.
6. The system will notify you that the
setting is complete for approximately 3
seconds.
! Language setting
1. Perform the preparation steps accord-
ing to “Preparation for screen settings”
F3-44.
2. Operate the “ ” or “ ” switch to
select the “Languages” item, and then pull
the “
/SET” switch toward you.
3. The current language setting is dis-
played. Pull the “
/SET” switch toward
you to enter the language selection mode.
4. Select the preferred language by
operating the “
” or “ ” switch, and then
pull the “
/SET” switch toward you.
5. Select “Set” by operating the “ ”
switch, and confirm the setting by pulling
the “
/SET” switch toward you.
Instruments and controls 3-51
– CONTINUED –
3
To Next Page
