Black plate (172,1)
北米Model "A1120BE-B" EDITED: 2011/ 10/ 28
3-50 Instruments and controls
6. The system will notify you that the
setting is complete for approximately 3
seconds.
! Bypass screen setting
1. Perform the preparation steps accord-
ing to “Preparation for screen settings”
F3-44.
2. Operate the “ ” or “ ” switch to
select the “Bypass Screen” item, and then
pull the “
/SET” switch toward you.
3. Select the item to set by operating the
“
” or “ ” switches, and then pull the “ /
SET” switch toward you.
4. Select “On” or “Off” by operating the
“
” or “ ” switch, and pull the “ /SET”
switch toward you.
If you want to change setting for another
item, repeat steps 3 and 4.
5. Select “Set” by operating the “ ” or
To Next Page
