Black plate (162,1)
北米Model "A1120BE-B" EDITED: 2011/ 10/ 28
3-40 Instruments and controls
2. Operate the “ ” or “ ” switch to
select the “Anniversary” item, and then
pull the “
/SET” switch toward you.
3. Select the item to set by operating the
“
” or “ ” switch, and then pull the “ /
SET” switch toward you.
4. Select numbers by operating the “ ”
or “
” switch, and then pull the “ /SET”
switch toward you.
5. After entering the date by repeating
step 4, select “Set” by operating the “
”
switch and confirm the setting by pulling
the “
/SET” switch toward you.
6. The system will notify you that the
setting is complete for approximately 3
seconds.
If an anniversary is approaching, the
following screen will be displayed accom-
panied by a beep when the ignition switch
has been turned to the “ON” position.
To Next Page
