Black plate (165,1)
北米Model "A1120BE-B" EDITED: 2011/ 10/ 28
2. Operate the “ ” or “ ” switch to
select the “Screen OFF” item, and then
pull the “
/SET” switch toward you.
3. Pull the “ /SET” switch once more
toward you.
4. The screen is turned off.
Restoring the screen
When the “
”, “ ” or “ /SET” switch is
pulled toward you after the ignition switch
is turned to the “ON” position, the screen
will be restored. The screen is restored
with the basic screen that was displayed
when the screen was turned off. While the
screen is off, a warning message will be
displayed if necessary, but other screens
are not displayed.
! Beep volume setting
1. Perform the preparation steps accord-
ing to “Preparation for image quality and
volume settings” F3-41.
2. Operate the “ ” or “ ” switch to
select the “Volume” item, and then pull the
“
/SET” switch toward you.
3. Pull the “ /SET” switch toward you.
Instruments and controls 3-43
– CONTINUED –
3
To Next Page
Loading...
