Black plate (167,1)
北米Model "A1120BE-B" EDITED: 2011/ 10/ 28
2. Operate the “ ” or “ ” switch to
select the “Top Display” item, and then pull
the “
/SET” switch toward you.
3. Pull the “ /SET” switch once more.
4. Select an item by operating the “ ” or
“
” switch, and then pull the “ /SET”
switch toward you.
5. Select “Set” by operating the “ ”
switch, and confirm the setting by pulling
the “
/SET” switch toward you.
6. The system will notify you that the
setting is complete for approximately 3
seconds.
! Fuel consumption screen setting
1. Perform the preparation steps accord-
ing to “Preparation for screen settings”
F3-44.
Instruments and controls 3-45
– CONTINUED –
3
To Next Page
