Black plate (184,1)
北米Model "A1120BE-B" EDITED: 2011/ 10/ 28
3-62 Instruments and controls
2. After the selection screen is displayed,
operate the “
” or “ ” switch to show the
“Initialize” item. Then, pull the “
/SET”
switch toward you.
! Reset to factory default settings
1. Perform the preparation steps accord-
ing to “Preparation for initialization” F3-
61.
2. Operate the “ ” or “ ” switch to
select the “Reset to Defaults” item, and
then pull the “
/SET” switch toward you.
3. The system displays “No” first. To
return to the factory default settings, select
“Yes” by operating the “
” switch.
4. Confirm the setting by pulling the “ /
SET” switch toward you.
5. The system will notify you that the
setting is complete for approximately 3
seconds.
To Next Page
