Subaru 2012 Impreza - Page 262

Black plate (276,1)
北米Model "A1120BE-B" EDITED: 2011/ 10/ 28
5-50 Audio
! Setting passkey
1. Select the “SET PASSKEY ” menu.
– After the currently set passkey is
displayed, a new passkey can be
entered.
2. Input the new passkey by performing
either of the following procedures.
– Operate the “TUNE/TRACK/CH”
dial.
– Press the talk switch
and say
the passkey.
3. Select the “CONFIRM” menu.
– The new passkey is displayed, the
passkey is changed and the mode
changes to the “PHONE SETUP”
mode.
! Deleting registered cell phone from
the list
1. Select the “DELETE” menu.
2. Select a cell phone to be deleted by
performing either of the following proce-
dures.
– Operate the “TUNE/TRACK/CH”
dial.
– Press the talk switch
and say
the voice tag.
3. Select the “CONFIRM” menu.
–“DELETED” is displayed, the data is
deleted and the mode changes to the
“PHONE SETUP” mode.
! System setup
After selecting the “SYS TEM SETUP”
menu, perform the following procedures.
Select the following menus by operating
the “TUNE/TRACK/CH” dial.
! Setting guidance volume
To set the guidance volume, perform the
following procedure.
1. Select th e “GUIDANCE VOL”/“GUI-
DANCE VOLUME” menu.
2. Set the guidance volume by operating
the “TUNE/TRACK/CH” dial.
! Initializing the registered data
To initialize the registered data, perform
the following procedure.
1. Select the “INITIALIZE” menu.
2. Select the “CONFIRM” menu.
– First “PLEASE WAIT”, then “INITI-
ALIZED” is displayed. The registered
data is initialized and the mode
changes to the last mode.
! Selecting language
To select the language, perform the
following procedure.
1. Select the “SEL LANGUAGE ” /“SE-
LECT LANGUAGE” menu.
2. Select the preferred language by
operating the “TUNE/TRACK/CH” dial.