Black plate (38,1)
北米Model "A1120BE-B" EDITED: 2011/ 10/ 28
1-10 Seat, seatbelt and SRS airbags
accident because the operation effi-
ciency of the seatbelt is inhibited.
. The sea tbelt should not pass
behind the securing hook for
the seatback.
. The seatbelt should not be
caught in the seatback and it
should be fully visible.
! 4-door models
Unlock the seatback by pulling the lock
release strap and then fold the seatback
down.
To return the seatback to its original
position, raise the seatback until it locks
into place and make sure that it is securely
locked.
In order to enable lock release of the
seatback from the trunk side, adjust the
lock release strap as follows.
1. Pull the lock release strap behind the
seatback out from its holder.
2. Install the strap on the seatback and
raise the seatback until it locks into place.
Make sure that the seatback is securely
locked.
In this case, fold the seatback forward
while pulling the strap down from the
trunk.
! 5-door models
Unlock the seatback by pulling the lock
release knob and then fold the seatback
down.
To return the seatback to its original
position, raise the seatback until it locks
into place and make sure that it is securely
locked referring to the following descrip-
tion.
To Next Page
Loading...
