Instruments and controls/Multi function display
Calendar
1) Today’s date
2) Birthday/Anniversary
In addition to the clock/calendar, the out-
side temperature and average fuel con-
sumption can also be displayed.
You can select clock (Type A), clock (Type
B) or calendar. The clock/calendar can
also be set so that it is not displayed. For
details, refer to “Clock/calendar screen
setting” F3-64.
! “Boost pressure” and “Accelerator
opening ratio” screen (turbo mod-
els)
1) Boost pressure (digital format)
2) Boost pressure (analog format)
3) Accelerator opening ratio (digital format)
4) Accelerator opening ratio (analog format)
5) Peak value of boost pressure (digital
format)
6) Peak value of boost pressure (analog
format)
This screen displays the boost pressure,
the accelerator opening ratio and the peak
value of the boost pressure in both the
digital and analog formats.
Also, the peak value of the boost pressure
is stored if the ignition switch is turned to
the “ACC” or “LOCK”/“OFF” position. To
reset the peak value, perform the following
procedure.
Resetting procedure of boost pressure
peak value
1. Pull the “
/SET” switch on the steer-
ing wheel toward you while the “Boost
pressure” and “Accelerator opening ratio”
screen is displayed. Then the following
confirmation screen will appear.
2. Select “ Yes” by operating t he “ ”
switch on the steering wheel, and confirm
the resetting by pulling the “
/SET” switch
toward you.
If you select “No”, the current peak value
is still kept.
3-46
To Next Page
Loading...
