4. Sele ct the preferred language by
operating the “
” or “ ” switch. Then
pull the “
/SET” switch toward you.
5. Select “ Set” by operating the “ ”
switch and confirm the setting by pulling
the “
/SET” switch toward you.
6. The system will notify you that the
setting is complete.
& Maintenance settings
The items in the maintenance settings can
be set. To change the items, operate the
“
” or “ ” switch toward you.
! Preparation for maintenance set-
tings
1. Turn the ignition switch to the “ON”
position.
2.Pullandholdthe“
/SET” switch
toward you to show the selection screen.
3. After the selection screen is displayed,
operate the “
” or “ ” switch to show the
“Maintenance” item. Then, pull the “
/
SET” switch toward you.
! Engine oil setting
1. Perform the preparation steps accord-
ing to “Preparation for maintenance set-
tings” F3-67.
Instruments and controls/Multi function display
– CONTINUED –
3-67
To Next Page
