! By off hook switch
1. Press the
switch on the steering
wheel to display the phone top screen.
2. Check that the “Call (Call)” screen is
displayed.
& Receiving on the Bluetooth
phone
! Incoming calls
When a call is received, the incoming call
screen is displayed with a sound.
. When you are on the Outgoing Call
screen, the screen changes to the Call
screen when the other party answers the
call.
. The “Mute”, “Speaker”, and “Bluetooth”
keys are disabled on the Outgoing Call
screen.
. When you receive a phone call while
the cellular phon e is connected, the
screen changes to the Incoming Call
screen.
Incoming Call screen
Unable to put call on hold screen
No. Function
&
1
“Option” key: Opens the Options
(volume settings) screen.
No. Function
&
2
“Hold” key: Puts the incoming call on
hold. This function may not work on
some cell phone models. This func-
tion is the same as pressing the
“ON_Hook” switch on the steering
wheel for a short period of time.
&
3
“OFF_Hook” key: Opens the Call
screen. This function is the same as
pressing the “OFF_Hook” switch on
the steering wheel.
&
4
“ON_Hook” key: Rejects the incoming
call. This function is the same as
pressing and holding the “ON_Hook”
switch on the steering wheel.
NOTE
. During international phone calls, the
other party’s name or number may not
be displayed correctly depending on
the type of cellular phone you have.
. The call and ringtone volume that
has been adjusted in the
Sound Set-
tings
(Sound Settings) screen sounds
when there is an incoming call. De-
pending on the type of Bluetooth
phone, both the system and Bluetooth
phone may sound simultaneously
when there is an incoming call. Refer
to ““Sound Settings (Sound Settings)”
screen” F5-100.
Audio/Phone operation (Hands–free system for cellular phones)
– CONTINUED –
5-97
To Next Page
Loading...
