Instruments and controls/Multi function display
registered directly without a notification.
8. The system will notify you that the
registration is complete.
NOTE
The driving history can be registered
for the trip meter A or B.
& Car settings
The items in the car settings can be set.
To change the items, operate the “
” or
“
” switch, and then pull the “ /SET”
switch toward you.
NOTE
When the vehicle is in motion, the
selectable items will be limited.
! Preparation for car settings
1. Turn the ignition switch to the “ON”
position.
2.Pullandholdthe“
/SET” switch
toward you to show the selection screen.
3. After the selection screen is displayed,
operate the “
” or “ ” switch to show the
“Car Setting” item. Then, pull the “
/SET”
switch toward you.
! Keyless buzzer volume setting
1. Perform the preparation steps accord-
ing to “Preparation for car settings” F 3-72.
2. Operate the “ ” or “ ” switch to
select the “Keyless Buzzer Volume” item.
Then push the
button.
3. Select a volume level by operating the
“
” or “ ” switch, and confirm the setting
by pushing the
button.
3-72
To Next Page
Loading...
