Instruments and controls/Multi function display
4. Select “On” or “Off” by operating the
“
” or “ ” switch. Then pull the “ /SET”
switch toward you.
If you want to change setting for another
item, repeat steps 3 and 4.
5. Select “Set” by operating the “ ” or
“
” switch, and confirm the setting by
pulling the “
/SET” switch toward you.
6. The system will notify you that the
setting is complete.
! Language setting
1. Perform the preparation steps accord-
ing to “Preparation for screen settings”
F3-59.
2. Operate the “ ” or “ ” switch to
select the “Languages” item. Then pull the
“
/SET” switch toward you.
3. The current language setting will be
displayed. Pull the “
/SET” switch toward
you to enter the language selection mode.
3-66
To Next Page
Loading...
