No. Function
&
1
Select to display the audio source
selection screen.
&
2
Select to change the FM band.
&
3
HD Radio indicator.
The indicator on the top right of the
screen changes according to the
reception condition of HD Radio.
&
4
Select to display a station list.
&
5
Select to scan radio channels.
This function enables searching for
receivable stations automatically,
and tunes in to a frequency for 5
seconds if a station is found. When
the 5-second period has elapsed, the
system searches for the next recei-
vable station again, and tunes in to
the frequency for 5 seconds.
&
6
Option key. Select to open the
Option screen.
&
7
If you press a key for less than 1.5
seconds, the system tunes to the
stored frequency.
If you press a key for more than 1.5
seconds, the system stores the
frequency to the selected preset
channel. Refer to “Presetting a sta-
tion” F5-36.
&
8
Select to display the sound setting
screen. Refer to “Basic operation”
F5-11.
&
9
Turn to adjust volume.
Press to turn the audio system on/
off.
No. Function
&
10
Turn to step up/down frequencies.
Press to select an audio mode.
&
11
Select to seek for a station/channel.
Select and hold for continuous seek.
NOTE
. The radio automatically changes to
stereo reception when a stereo broad-
cast is received.
. The radio automatically blends to an
HD Radio signal in AM or FM where
available.
. Digital, CD-quality sound. HD Radio
Technology enables local radio stations to
broadcast a clea n digita l signal. AM
sounds like today’s FM and FM sounds
like a CD.
Audio/Radio operation
– CONTINUED –
5-33
To Next Page
Loading...
