Speed Control System
GENERAL
SP-2
1. General
The accelerator outer cable is secured to the accelerator pedal bracket rather than to the toeboard.
Securing the outer cable in this way has a merit of making the ratio of throttle valve movement to
cable stroke less variable. This arrangement is also effective to prevent unsmooth cable return
movement that may result from deformation of the toeboard or improper installation of the accel-
erator pedal and, therefore, to improve safety.
(1) Accelerator cable
(2) Grommet
(3) Toeboard
(4) Accelerator pedal
(5) Bracket
(1)
(2)
(3)
(5)
(4)
B2H4134B
To Next Page
