Automatic Transmission
ELECTROHYDRAULIC CONTROL SYSTEM
AT-13
E: POWER INDICATOR LIGHT
The automatic transmission equipped vehicle is capable of selecting two driving patterns; “Base”
pattern for ordinary driving and “Power” pattern for uphill driving or rapid acceleration. The POW-
ER indicator light lights when the Power pattern is selected. See the table below:
F: THROTTLE POSITION SENSOR
The throttle position sensor provides electrical signals corresponding to throttle valve positions.
The throttle valve angular position and accelerator depressing speed are detected by this throttle
position sensor.
Selector lever position Change of pattern POWER indicator light
“D”, “3”, “2” range Pattern is changed when power switch is
ON.
! “Base” pattern: OFF
! “Power” pattern: ON
To Next Page
Loading...
