Black plate (251,1)
一般Model "A2510GE-B" EDITED: 2015/ 6/ 25
! “Balance/Fader”
A good balance of the left and right stereo
channels and of the front and rear sound
levels is important for good quality audio
program listening.
Keep in mind that when listening to a
stereo recording or broadcast, changing
the right/left balance will increase the
volume of 1 group of sounds while
decreasing the volume of another.
1. Touch the “Set” button of the Balance/
Fader function.
For Europe:
Except for Europe:
2. Select the “Volume Balance Control”
menu.
3. Adjust the balance by pressing “ ”
or “
” button.
4. Adjust the fader by pressing “
” or
“
” button.
5. Select the “Vocal Image Control”
menu.
6. Adjust the balance by pressing “ ”
or “
” button.
7. Adjust the fader by pressing “
” or
“
” button.
! “Speed Volume Control”
The system adjusts to the optimum
volume and tone quality according to
vehicle speed to compensate for in-
creased vehicle noise.
1. Touch the right side button of the
Speed Volume Control function, and se-
lect “OFF”, “Low”,or“High” menu. “High”
comes to have a bigger effect.
Audio/Basic operation
5-19
– CONTINUED –
5
To Next Page
Loading...
