1-7
1. Introduction｜Structure
1．Introduction
Bare fiber pads
Hold fibers seated into the V-
grooves. Normally they are
attached to the hood.
LED for fiber observation
Illuminates the fiber and make
an image on the microscope.
V-
roove illumination
Illuminates the V-groove. Lit
when the hood is opened.
Lens protection
lass
Protects the lens surface.
Microscope ob
ective lens
Fiber is observed through the
lens.
V-grooves
Keep bare fibers aligned.
Electrode cover plate
Holds the electrode seated
into the retaining groove.
■V-
rooves, electrodes, other components
8
9
1
2
3
5
6
4
7
Fiber coatin
clamp
Holds fiber coating.
Electrodes
Arc is generated between the
electrodes.
To Next Page
Loading...
