Sumitomo TYPE-72C+ - 2. Basic Splicing Operation; Preparation and Initial Setup

2-1
2. Basic splicing operation｜Preparation for splicing
2. Basic splicing operation
Gauze wipes
Jacket remover
❚
Preparation for splicing
Fiber cleaver
Before splicing, get all the necessary items ready.
TYPE-72C+ standard package
*Note that the applicable fiber protection sleeves differ
depending on the cleave length.▸P.5-2
TYPE-72C+ standard package
・Jacket remove
r
・Fiber cleave
r
・Fiber protection sleeves* ・Pure (more than 99%) alcohol
・Lint-free
g
auze wipes
This chapter describes basic fiber splicing operation using fusion splicer.
Pure Alcohol