Sumitomo TYPE-72C+ - Nanotune Splice Mode

4-9
4.Splice program｜NanoTune™ splice mode
4. Splice program
❚
NanoTune™ splice mode
The NanoTune™ analyzes a fiber end face and automatically fine-tunes splice program
to achieve an ideal splice. When the NanoTune™ is activated, a dedicated splice
screen appears.
Coping with poorly cleaved optical fiber, which cannot be spliced by conventional
splicers, the NanoTune™ can yield the best quality and low loss splices.
3: Arc is generated.
1: Select NanoTune™ splicing
program. Tap the Set
icon( ).
2: Inspection of fiber end face.
The NanoTune™ is activated
when the end face is poor.
4: The NanoTune™ splice is
completed and an estimated
loss is dis
p
la
y
ed.
5: The proof test is started.
6: The proof test is complete.
The splicer stores data on representative fiber end shapes, and based on the
data the NanoTune™ automatically fine-tunes splice condition to achieve an ideal
splice. However, it does not provide a stable splice depending on the operational
environments or conditions.
In this case choose a suitable splice program by
yourself.