6-10
6. Functions｜SumiCloud™
6. Functions
The TYPE-72C+ can connect to a smartphone via wireless LAN using a
dedicated wireless LAN SD card (WLSD-0416) and can be operated with the
smartphone. To establish the connection, smartphone application
“SumiCloud™” is required. Download and install it from “Google Play” or
“Apple” online store.
Please make sure you have installed the latest version of TYPE-72C+
software and smartphone app “SumiCloud™”. If not please install.
In “SumiCloud™”, you can utilize various functions as shown in the table in the
next page.
3: After the setup is complete, wireless
LAN icon (
) appears on the
monitor screen.
Network SSID: is the name that
devices can identify an inserted SD
card as.
Password setting: is required to
connect the splicer to devices. Choose
this option to change a password. The
password must be 8-20 alphanumeric
characters long. To validate a new
password, re-boot the splicer.
Guidance: shows or hides the QR code
screen that lets you download the
SumiCloud™ app.
SD card slot
Wireless LAN icon
4: Start your smartphone and enter the
password to enable wireless LAN
connection.
Factory default password is
“12345678”.
5: Start “SumiCloud™” on the smartphone.
*If the wireless LAN SD card is not
inserted in the splicer, the function
cannot be enabled.
How to set up
1: Insert the wireless LAN SD card into
the splicer.
2: Set up the splicer referring to the
on-screen guidance.
❚
SumiCloud™
To Next Page
Loading...
