Sumitomo TYPE-72C+ - Splice Program Editable Items

4-6
4.Splice program｜Splice program editable items 1/2
4. Splice program
❚
Splice program editable items 1/2
Editable items Details
Operator Administrator
View Edit View Edit
Name Allows to edit splice program name
✔ - ✔ ✔
Abbreviated name
Allows to edit heater program name which
is displayed on the main splice screen.
✔ ✔ ✔ ✔
Template
Views an original Splice Program which was
copied.
✔ - ✔ -
Note
Allows to add a note to the selected splice
program. (up to 21 characters)
✔ ✔ ✔ ✔
Arc Power Sets the arc power. Generally it is
automatically set by an arc test and does
not need to be changed. It is displayed as
[Standard + XX] and [Standard] represents
the arc power which has been set. [+ XX]
can be manually edited.
✔ ✔ ✔ ✔
Auto Arc Power Automatically optimizes arc power. (Select
ON⇔OFF）
✔ - ✔ ✔
Gapset Position Sets the position of splicing fibers.
Generally it is automatically set by an arc
test and does not need to be changed.
✔ ✔ ✔ ✔
Cleaning Arc Time Sets the time for cleaning arc to remove
dust on optical fiber.
✔ - ✔ ✔
Gap Sets the gap between fiber end faces before
arc fusion.
✔ ✔ ✔ ✔
Cleave Angle Limit Sets the threshold of cleave angle. If a
reading exceeds the threshold, the splicer
will give an error.
✔ - ✔ ✔
Fiber Detection Automatically recognizes optical fiber
loaded. If the selected splice program does
not match the fiber, the splicer shows a
message on the monitor. (Select ON⇔OFF）
✔ - ✔ ✔
Core Angle Limit Sets the threshold of core angle. If a reading
exceeds the threshold, the splicer will give
an error.
✔ - ✔ ✔
Arc Time
Sets the arc fusion time
✔ ✔ ✔ ✔
Prefuse Time Sets the time between start of arc fusion
and feeding of fibers.
✔ ✔ ✔ ✔
Prefuse Power Sets the power for pre arc fusion.
- -
✔ ✔
Overlap Sets the distance of feeding fiber.
✔ ✔ ✔ ✔
Fiber Pulling ON or OFF the action of pulling fiber after
overlapping fiber.
- - ✔ ✔
Fiber Pulling Start*
Sets the time of pulling fiber.
- - ✔ ✔
Fiber Pulling Length*
Sets the distance of pulling fiber.
- - ✔ ✔
Fiber Pulling Speed*
Sets the speed of pulling fiber.
- - ✔ ✔
*Appears when Fiber Pulling is set to ON.