1-5
1. Introduction｜Structure
1．Introduction
Hood
Provides protection from various
Environmental conditions.
Keypad
Keys are used to turn on/off the
power, perform a splice and heat
shrink protection, and set up
functions.
Touchscreen monitor
Displays fiber image, splice data
and menu. Touchscreen enables to
start the splicing and heating
processes and edit the settings.
Heat shrink oven
Used to heat and shrink fiber
protection sleeves. The splicer
has 2 independent heat shrink
ovens (front and rear).
Battery pack slot
Battery is installed in the slot and
protective by the lid of the slot.
Input/output panel
DC output terminal for hot jacket
remover and USB port.
1
2
3
4
5
6
In
ut/out
ut
anel
6
1
Keypad
2
Touchscreen monitor
Hood
Heat shrink oven
3
4
5
Battery pack slot
❚
Structure
To Next Page
Loading...
