4-5
4.Splice program｜Showing /hiding splice program(in Administrator mode)
4. Splice program
3: After is selected, the
selected splice program will be
hidden in the Operator mode.
▸P.5-5: Showing/Hiding heater program
2: Tap to switch
between ON⇔OFF.
1: Referring to the procedures in
Page 4-4, go to “Splice
Program edit screen”. Tap the
Pencil icon at ( ) at the right
upper corner of the screen.
The splice program which is currently selected for us cannot be hidden. To hide
the program, first select other program to deselect the program, and then do the
above procedures.
Once the program is displayed in the Operator mode, it is still saved after the
power is switched off.
❚
Showing /Hiding splice program (in Administrator mode)
An administrator can show or hide splice programs in the Operator mode.
First, log in to Administrator mode to do this action.
(▸P.8-1 Logging in to and logging out of Administrator mode)
To Next Page
Loading...
