Contents iii
Contents
1. Sun StorEdge 3000 Family FRUs 1–1
1.1 Available FRUs 1–2
1.2 Static Electricity Precautions 1–5
1.3 Powering Off the Array 1–5
2. Disk Drive, Air Management Sled, and Tabletop Cover FRUs 2–1
2.1 Replacing a Disk Drive 2–2
2.1.1 Identifying the Defective Disk Drive 2–3
2.1.2 Removing a Defective Disk Drive 2–4
2.1.3 Installing a New Disk Drive 2–5
2.1.4 Scanning the New Drive and Related Procedures 2–6
2.1.4.1 Scanning the New Drive 2–6
2.1.4.2 Checking and Performing the Correct Powerup
Sequence 2–7
2.1.4.3 Assigning a Disk Drive as a Spare 2–8
2.1.4.4 If the Logical Drive Status is REBUILDING 2–9
2.1.4.5 Automatic Rebuild and Automatic Global Spare
Assignments After a Failed Drive is Replaced 2–9
2.2 Installing an Air Management Sled 2–11
2.3 Adding or Removing the Tabletop Cover 2–11
2.3.1 Converting a Rack-Ready Array to a Tabletop Array 2–12
To Next Page
Loading...
Need help?
General
