1-1
CHAPTER
1
Sun StorEdge 3000 Family FRUs
This document provides instructions for removing and installing field-replaceable
units (FRUs) in Sun StorEdge
™
3120 SCSI arrays, Sun StorEdge 3310 SCSI arrays,
and Sun StorEdge 3510 FC arrays, and Sun StorEdge 3511 FC arrays with SATA.
Note – FRU installation procedures for Sun StorEdge 3510 and 3511 FC arrays are
identical except where differences are identified in this manual.
Instructions are also included for FRUs which are common to all four arrays. These
FRU components can be replaced by customers or by Sun service representatives.
This chapter covers the following topics:
■ “Available FRUs” on page 1-2
■ “Static Electricity Precautions” on page 1-5
■ “Powering Off the Array” on page 1-5
Removal and installation instructions are provided for the following FRUs:
■ Disk drives
■ Power and fan modules
■ Card modules
■ Special-Use FRUs, such as batteries
To Next Page
Loading...
Need help?
General
