Chapter 5 FC Module FRUs 5-25
Note – Each operating system has additional procedures or requirements for seeing
a new device. For instructions related to each operating system, refer to the
appropriate appendix in the Sun StorEdge 3510 and 3511 FC Array Installation,
Operation, and Service Manual.
Note – In some operating systems, you will also have obsolete files or paths
associated with the removed JBOD unit; for example in Solaris operating systems,
ses files are created for each JBOD drive under /dev/es. Consult your operating
system documentation for information on how to remove or modify appropriate
files and paths.
19. After you create RAID logical drives on the new RAID array, restore the data onto
the drives.
Note – You must use a tool within Solaris, or an external software package to
perform the data restore function. The firmware, software, and CLI provided with
the Sun StorEdge 3510 and 3511 FC arrays do not have restore functions for data.
To Next Page
Loading...
Need help?
General
