55
APPENDIX
A
Troubleshooting and Technical
Assistance
Appendix A contains information to help you troubleshoot minor workstation
problems. If you experience problems while setting up your workstation, refer to the
troubleshooting information in the following table. If the problem persists, see“How
to Get Technical Assistance” on page 57.
A.1 Troubleshooting the Workstation
TABLE A-1 Troubleshooting the Workstation
Problem Troubleshooting
Workstation does not power
on when the front panel
power switch is pressed.
1. Verify that the workstation power cord is connected to the system and a
grounded wall outlet.
2. Verify that there is power to the wall outlet.
3. Verify that the voltage selector is set to the correct voltage.
Workstation powers on, but
the monitor does not.
1. Verify that the power switch for the monitor is on.
2. Verify that the monitor power cord is connected to a wall outlet.
3. Verify that there is power to the wall outlet.
Workstation and monitor
power on, but no video
displays on the monitor
screen.
1. Verify that the monitor cable is attached to the motherboard VGA
connector or to an optional graphics accelerator.
To Next Page
Loading...
Need help?
General
