poweroff(8)
System Administration 105
EXAMPLE 2 Turns off power to domains with domain IDs 0.
EXAMPLE 3 Forcibly turns off power to domains with domain IDs 0.
EXAMPLE 4 Turns off power to domains with domain IDs 2. Automatically replies with
"y" to the prompt.
EXAMPLE 5 Turns off power to domains with domain IDs 2. Automatically replies with
XSCF> poweroff -d 0
DomainIDs to power off:00
Continue? [y|n]:
y
00:Powering off
*Note*
This command only issues the instruction to power-off.
The result of the instruction can be checked by the "showlogs power".
XSCF> poweroff -f -d 0
DomainIDs to power off:00
The -f option will cause domains to be immediately resets.
Continue? [y|n]:y
00:Powering off
*Note*
This command only issues the instruction to power-off.
The result of the instruction can be checked by the "showlogs power".
XSCF> poweroff -y -d 2
DomainIDs to power off:02
Continue? [y|n]:y
02:Powering off
*Note*
This command only issues the instruction to power-off.
The result of the instruction can be checked by the "showlogs power".
To Next Page
Loading...
