showtimezone(8)
System Administration 449
NAME showtimezone - display the XSCF time zone and Daylight Saving Time information
of current settings
SYNOPSIS showtimezone -c tz
showtimezone -c dst [-m {standard | custom}]
showtimezone -h
DESCRIPTION The showtimezone(8) command displays the XSCF time zone and Daylight Saving
Time information of current settings.
Privileges You must have one of the following privileges to run this command:
useradm, platadm, platop, auditadm, auditop, domainadm, domainmgr,
domainop, fieldeng
Refer to setprivileges(8) for more information.
OPTIONS The following option is supported:
EXTENDED
DESCRIPTION
■ The Daylight Saving Time information is displayed in the following format.
■ When specified custom:
std offset dst[offset2][from-date[/time] to-date[/time]]
-c tz Displays the time zone.
-c dst Displays the Daylight Saving Time information.
-h Displays usage statement. When used with other
options or operands, an error occurs.
-m {standard | custom} Specifies the Daylight Saving Time information to be
displayed. Either of the following can be specified. If the
-m option omitted, it is regarded as "-m custom"
specified.
standard
Displays the Daylight Saving Time information that has
been set in the current time zone by default.
custom
Displays the Daylight Saving Time information that you
set by using the settimezone(8) command. If the
Daylight Saving Time is not set, nothing displayed.
std Abbreviations of time zone.
To Next Page
Loading...
