showldap(8)
System Administration 377
NAME showldap - display the Lightweight Directory Access Protocol (LDAP)
configuration for the Service Processor
SYNOPSIS showldap
showldap [-c ]
showldap -h
DESCRIPTION showldap(8) displays the Service Processor LDAP configuration. When invoked
without options, showldap displays all LDAP configuration except for the
certificate chain and the password used when binding to the LDAP server.
Privileges You must have useradm or fieldeng privileges to run this command.
Refer to setprivileges(8) for more information.
OPTIONS The following options are supported:
EXAMPLES
EXAMPLE 1 Displaying All LDAP Configuration Data
EXAMPLE 2 Displaying All LDAP Configuration Data
EXIT STATUS The following exit values are returned:
-c Displays the LDAP server certification chain.
-h Displays usage statement.
When used with other options or operands, an error occurs.
XSCF> showldap
Bind Name: user
Base Distinguishing Name: ou=people,dc=company,dc=com
LDAP Search Timeout: 60
Bind password: Set
LDAP Servers: ldap://company.com:389
CERTS: None
XSCF>
showldap -c
There are no certificates configured.
0 Successful completion.
>0 An error occurred.
To Next Page
Loading...
Need help?
General
