prtfru(8)
System Administration 111
NAME prtfru - display FRUID data on the system and External I/O Expansion Unit
SYNOPSIS prtfru [-c][-l][-M][-x][container]
prtfru -h
DESCRIPTION prtfru is used to obtain Field Replaceable Unit Identifier (FRUID) data from the
system and External I/O Expansion Unit. Its output is a tree structure, echoing the
path in the FRU tree to each container. When a container is found, the data from
that container is printed in a tree structure as well.
prtfru without any arguments prints the FRU hierarchy and all of the FRUID
container data. prtfru prints to the screen. Output can be redirected to a file.
Note – FRU information from the domains is not available using this command.
Privileges You must have fieldeng privileges to run this command.
Refer to setprivileges(8) for more information.
OPTIONS The following options are supported:
OPERANDS The following operands are supported:
EXAMPLES
EXAMPLE 1 Displaying FRU Tree Hierarchy
-c Prints only the containers and their data. This option does not print
the FRU tree hierarchy.
-h Displays usage statement.
When used with other options or operands, an error occurs.
-M Displays text by page. This option provides a function that is the
same as that of the more command.
-l Prints only the FRU tree hierarchy. This option does not print the
container data.
-x Prints in XML format with a system identifier (SYSTEM) of
prtfrureg.dtd.
container The path and name of the particular hardware that holds data.
XSCF> prtfru -l
/frutree
/frutree/chassis (fru)
/frutree/chassis/iou0
To Next Page
Loading...
Need help?
General
