shownameserver(8)
System Administration 405
NAME shownameserver - display the registered domain name system (DNS) servers
specified on the XSCF network
SYNOPSIS shownameserver
shownameserver -h
DESCRIPTION shownameserver(8) command displays the registered DNS servers in the XSCF
network.
Privileges You must have one of the following privileges to run this command:
useradm, platadm, platop, auditadm, auditop, domainadm, domainmgr,
domainop, fieldeng
Refer to setprivileges(8) for more information.
OPTIONS The following option is supported:
EXTENDED
DESCRIPTION
The setnameserver(8) command sets the DNS servers used in the XSCF network.
EXAMPLES
EXAMPLE 1 Displays the DNS servers currently set for the XSCF network. The following
example shows that three DNS servers have been set:
EXAMPLE 2 Displays the DNS servers currently set for the XSCF network. The following
example shows that no DNS server is set:
EXIT STATUS The following exit values are returned:
SEE ALSO setnameserver(8)
-h Displays usage statement.
XSCF> shownameserver
nameserver 192.168.1.2
nameserver 10.18.108.10
nameserver 10.24.1.2
XSCF> shownameserver
---
0 Successful completion.
>0 An error occurred.
To Next Page
Loading...
