applynetwork(8)
System Administration 19
On the M8000/M9000 servers:
route :
Continue? [y|n] :y
XSCF> applynetwork
The following network settings will be applied:
xscf#0 hostname :hostname-0
xscf#1 hostname :hostname-1
DNS domain name :example.com
nameserver :10.23.4.3
interface :xscf#0-lan#0
status :up
IP address :10.24.144.214
netmask :255.255.255.0
route : -n 0.0.0.0 -m 0.0.0.0 -g 10.24.144.1
interface :xscf#0-lan#1
status :down
IP address :
netmask :
route :
interface :xscf#0-if
status :down
IP address :10.24.100.1
netmask :255.255.255.0
interface :lan#0
status :down
IP address :
netmask :
To Next Page
Loading...
