rebootxscf(8)
118 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009
EXAMPLE 2 Resets the XSCF. Automatically replies with "y" to the prompt.
EXAMPLE 3 Resets the XSCF. Automatically replies with "y" without displaying the
prompt.
EXAMPLE 4 Cancels the rebootxscf(8) command execution that is in progress.
EXIT STATUS The following exit values are returned:
SEE ALSO applynetwork(8), setdate(8), sethttps(8), setssh(8)
XSCF> rebootxscf -y
The XSCF will be reset. Continue? [y|n]:y
XSCF> rebootxscf -q -y
XSCF> rebootxscf
The XSCF will be reset. Continue? [y|n]:n
XSCF>
0 Successful completion.
>0 An error occurred.
To Next Page
Loading...
Need help?
General
