setdomainmode(8)
172 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised April 2009
â– Host watchdog and suppress break signal reception, auto boot function, and
operational mode of CPU:
Refer to setprivileges(8) for more information.
OPTIONS The following options are supported:
platadm Can run this command for all domains.
domainadm Can run this command only for your managed domains.
-d domain_id Specifies the domain ID to be set. domain_id can be 0–23
depending on the system configuration.
-h Displays usage statement. When used with other options or
operands, an error occurs.
To Next Page
Loading...
Need help?
General
