addboard(8)
8 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009
OPERANDS The following operand is supported:
EXTENDED
DESCRIPTION
â– You can execute the addboard(8) command under the environment where the
following services, managed by the Solaris Service Management Facility (SMF),
are in operation:
â– Domain SP Communication Protocol (dscp service) is working properly and
the network with XSCF has been established
â– Domain Configuration Server (dcs service) is working properly
â– Sun cryptographic key management daemon (sckmd service) is working
properly
-d domain_id Specifies the ID of the domain in which an XSB is to be
configured or to which it is to be assigned. domain_id can be 0–23
depending on the system configuration.
-f Forcibly incorporates into a domain an XSB.
Caution – If the -f option is used to forcibly add an XSB to a
domain, all the added hardware resources may not work
normally. For this reason, use of the -f option is not
recommended in normal operation. If the -f option must be
specified, verify the status of every added XSB and device.
-h Displays usage statement. When used with other options or
operands, an error occurs.
-n Automatically answers "n" (no) to all prompts.
-q Suppresses all messages to stdout, including prompts.
-v Displays a detailed message. If this option is specified with the
-q option, the -v option is ignored.
-y Automatically answers "y" (yes) to all prompts.
xsb Specifies the XSB number to be configured or assigned. Multiple
xsb operands are permitted, separated by spaces. The following
xsb form is accepted:
x–y
where:
x An integer from 00–15.
y An integer from 0–3.
To Next Page
Loading...
Need help?
General
