showdcl(8)
328 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008
OPTIONS The following options are supported:.
EXTENDED
DESCRIPTION
â– An XSB for which the floating board priority is set to a low value is difficult to
use as a floating board. Accordingly, it is difficult for the system board to affect
the domain Solaris OS.
â– The setdcl(8) command sets the DCL.
EXAMPLES
EXAMPLE 1 Displays detailed information on the DCL that is set for domain ID 0
EXAMPLE 2 Displays details in the DCL that is set for domain ID 0.
-a Displays information that is set for all domains.
-d domain_id Specifies the ID of the domain for which information is to be
displayed. The domain_id can be 0–23 depending on the system
configuration.
-h Displays usage statement. When used with other options or
operands, an error occurs.
-l lsb Specifies the LSB number whose information is to be displayed.
Multiple -l options can be specified by delimiting them with
spaces. Specify an lsb value by using an integer ranging from 0 to
15. If lsb is omitted, all the LSBs in the domain are targets.
-v Also displays information on Cfg-policy, No-Mem, No-IO, and
Float in the DCL.
XSCF> showdcl -d 0
DID LSB XSB Status
00 Running
00 00-0
04 01-0
08 02-0
12 03-0
XSCF> showdcl -v -d 0
DID LSB XSB Status No-Mem No-IO Float Cfg-policy
00 Running FRU
00 00-0 False False False
01 -
02 -
To Next Page
Loading...
Need help?
General
