Sun Microsystems Sun SPARC Enterprise M5000 - Recognizing Status Notification or Fault Information in a Monitoring Message on the XSCF Shell Terminal

showdevices(8)
System Administration 335
00 00-0 2 on-line 2530 5.5
00 00-0 3 on-line 2530 5.5
00 00-0 4 on-line 2530 5.5
00 00-0 5 on-line 2530 5.5
00 00-0 6 on-line 2530 5.5
00 00-0 7 on-line 2530 5.5
00 01-0 50 on-line 2048 4
00 01-0 51 on-line 2048 4
00 01-0 52 on-line 2048 4
00 01-0 53 on-line 2048 4
Memory:
-------
board perm base domain target deleted remaining
DID XSB mem MB mem MB address mem MB XSB mem MB mem MB
00 00-0 2048 1290 0x000003c000000000 4096 00-1 250 1500
00 01-0 2048 0 0x000002c000000000 4096
IO Devices:
----------
DID XSB device resource usage
00 00-0 sd0
00 00-0 sd1
00 00-0 sd2
00 00-0 sd3 /dev/dsk/c0t3d0s0 mounted filesystem "/"
00 00-0 sd3 /dev/dsk/c0t3s0s1 dump device (swap)
00 00-0 sd3 /dev/dsk/c0t3s0s1 swap area
00 00-0 sd3 /dev/dsk/c0t3d0s3 mounted filesystem "/var"
00 00-0 sd3 /var/run mounted filesystem "/var/run"
00 00-0 sd4
00 00-0 sd5
00 00-0 sd6