showlogs(8)
394 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008
â– TEMPERATURE AND HUMIDITY RECORD
Date: Log collection date and time (month day hour:minute:second
time-zone year)
The displayed time is the local time.
Message: Event message
Switch: Status of the mode switch of the operator panel
One of the following states are displayed:
Locked Normal operation mode
Service Service mode
Code: Detailed event information
The displayed information is in hexadecimal format
Date Temperature Humidity Power
Mar 30 17:45:31 JST 2005 32.56(C) 60.20% System Power On
Mar 30 17:55:31 JST 2005 32.56(C) 60.25% System Power Off
:
:
Date: Log collection date and time (month day hour:minute:second
time-zone year)
The displayed time is the local time.
Temperature: Intake air temperature
Decimal numbers are displayed to two decimal places. The unit
is degree Celsius ( C).
Humidity: Humidity
The displayed numbers are percentages (%). Humidity is
displayed on the M8000/M9000 servers only.
Power: Power state of the main unit
Either of the following states is displayed:
System Power ON The main unit power is on.
System Power OFF The main unit power is off.
To Next Page
Loading...
Need help?
General
