viewaudit(8)
488 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008
-c classes Selects records in indicated classes. classes is a comma-
separated list of audit classes. A class may be specified by
its numeric value or its name. The ACS_ prefix may be
omitted. For example, the class of audit related events can
be expressed as ACS_AUDIT, AUDIT or 16.
The following are valid classes:
all Denotes all classes.
ACS_SYSTEM(1) System-related events
ACS_WRITE(2) Commands that can modify
a state
ACS_READ(4) Commands that read a
current state
ACS_LOGIN(8) Login-related events
ACS_AUDIT(16) Audit-related events
ACS_DOMAIN(32) Domain management–
related events
ACS_USER(64) User management–related
events
ACS_PLATFORM(128) Platform management–
related events
ACS_MODES(256) Mode-related events
-D date-time Selects records that occurred on a specific day (a 24-hour
period beginning at 00:00:00 of the day specified and
ending at 23:59:59). The day specified is in local time in the
following format: yyyymmddhhmmss (year,month,day,
hour,minute,second). The time portion of the argument, if
supplied, is ignored. Any records with timestamps during
that day are selected. If any hours, minutes, or seconds are
given, they are ignored. -D cannot be used with -A or -B.
-E end-record Selects the last record matching the selection criteria to
display.
To Next Page
Loading...
Need help?
General
