EasyManua.ls Logo

Sunbeam EM9300 Caffe Bellissimo - Page 48

Sunbeam EM9300 Caffe Bellissimo
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Troubleshooting continued
Display
Water runs into the waste
container instead of through
the coffee spout during
rinsing when switching the
coffee machine on and off
Cause
Brewing unit blocked.
I
Remedy
Adjust the brewing unit.
Push the toothed opening
on the measuring spoon
onto the pin turn it
clockwise 3 times
Coffee machine switches off Pressure in brewing unit
after rinsing or dispensing too high.
coffee
Coffee machine cannot be Not plugged in
switched on
Remove and clean the
brewing unit. If the
brewing unit is closed,
open before cleaning.
Unscrew the brewing unit
at the black tooth pin.
An opened brewing unit
is illustrated in page 30
Cleaning the brewing unit
Insert the mains plug
Coffee dispensing unit not Install coffee dispensing
installed
Brewing unit not fitted
Brewing unit was not
pushed in completely
unit
Install brewing unit
Push the brewing unit in
until it stops
Note: If you cannot resolve the problem with the steps described above,
please contact customer service on 1300 881 861
46

Related product manuals